Application: The V - T60 industrial dustproof and waterproof fixtures are designed for the lighting of premises with high ambient temperature (around 60°C). Body and cover: The basic body of the fixture is produced from polyester filled with fibre glass. The optical active cover is produced from PC. The fixture protection is ensured by the clamping of polyurethane foam sealing. The cover surface is completely smooth on the outside for easy cleaning. Clips: For the fixture sealing system the stainless steel clips are used. Reflector: The reflector of the fixture is produced from white painted metal sheet, 0.6 mm thick. All the electric components of the fixture are mounted on it. Electric equipment: Inductive ballasts, three-pole terminal block without screws for the connection of conductors up to 2.5 mm², lamp-holders of fluorescent tube and starter. For the connection of the electric components 0.75 mm² conductors are used, IEC 227, T 105 °C, white and blue-white colour. Fastening system: In the main body there are pre-pressed holes with a spacing 233 mm (2x18W) and 838 mm (2 x 36W). The fixture can be fastened directly on the ceiling, wall or via suspension brackets. Standard accessories: 1 pc sealing grommet, 1 pc sealing plug, plastic clamps for wires.