Application: The POINTER - II luminaires are industrial dustproof and waterproof lighting fixtures for fluorescent lamps, produced in the isolation class II. They are suitable for the lighting of indoor and outdoor areas, as well as demanding resistance to dust penetration and water jets. The fixture is further equipped with fastening elements, sealing grommets and clips. Body: Injection technology is used for the body production. The body material (grey RAL 7035) is PC. The luminaire protection is ensured by the clamping of polyurethane foam sealing. Cover: The light active cover is produced by injection technology. The optical cover material (transparent colour) is PC. The measured luminous efficacy is 64 %. The cover surface is completely smooth on the outside for easy cleaning. Clips: For the lighting fixture sealing and locking the clips from PC material are used. Reflector: The reflector of the fixture is produced from white painted metal sheet, 0.4 mm thick. All the electric components of the fixture are mounted on it. Electric equipment: Inductive or electronic ballasts, two-pole terminal block without screws for the connection of conductors up to 2.5 mm² and lamp-holders of fluorescent tube (G23 or 2G7). For the connection of the electric components 0.75 mm² insulation class II conductors are used, T 105 °C, white colour. Fastening system: The fixtures are equipped with special self-locking clips, on which the fixtures are easily fastened. The joint can be taken apart. The POINTER luminaires can be suspended on a cable by means of self-locking wire suspender. This cable suspension makes fastening easy and it works with accuracy of ≤ 1 mm. Another possibility is to hang the fixture on a chain via a suspension bracket. Standard accessories: 1 pcs sealing grommet, 1 pcs sealing plug, 2 pcs fastening spring, double clamp for feeding cables.